CONTROL OF VISUAL EVENTS WITH MIDI NOTE ON COMMANDS

See also figure 3. page 20

Note: The default Visual MIDI channel is 16.

When producing Streamers and flutters/punches with MIDI note on commands

ProCue 1m1 needs two things to be defined before the actual event generation.
(Unless the default settings is used, see above)

1)
2)

STREAMER TRAVERSAL TIME
HOLE SIZE

To define the length/time of a streamer let ProCue 1m1 receive a MIDI NOTE ON
command with one of the following note numbers: Note 72 (2 sec), note 74(2.66 sec.)

or note 76(3.33 sec.)

To define the hole size let ProCue 1m1 receive a MIDI NOTE ON command with
one of the following note numbers: 84(MINI), 86(SMALL), 88(MEDIUM) or

89(BIG).

To trig a streamer one of the "Streamer trigger" note numbers has to send to ProCue
1m1. Depending on the desired streamer color choose a specified note number

between 47 and 59. See figure 3. For an example sending MIDI note number 48 on
the "Visual events" MIDI channel will generate in a green streamer immediately.

To trig a flutter/punch send one of the "Flutter/Punch trigger" note numbers.

Depending on the desired flutter pattern choose a specified note number between 47
and 59. See figure 3. For an example sending a MIDI note number 62 will generate a

3 flutter immediately.

MIDI key number layout
There are four kinds of MIDI note on commands that controls the Video Event
generator. See fig.3 page

1) Flutter/punch HOLE SIZE
These MIDI note numbers will select the Hole size for the next Flutter or Punch.

BIG:
MEDIUM:

SMALL:

MINI:

Note number 89
Note number 88 (Default)

Note number 86

Note number 84

18