Falling edge and raising edge.
RESULT OF TRIGGER B
The output/result of Trigger B can be set to either a
Sync Pop or Audio Click 2.
AUDIO GENERATOR
ProCue 1m1 has four audio generators: CLICK 1, CLICK 2,
SYNC POP and the PRE OUT CLICK generator.
CLICK 1
Can be controlled by two things:
* A MIDI note on command
* AUDIO RE-TRIGGER.
CLICK 2
Can be controlled by two things:
* A MIDI note on command
* TRIGGER B(if TRIGGER B is set to control CLICK 2)
SYNC POP (a 1 kHz tone sounding one film frame in duration)
The SYNC POP can be controlled by three things:
* A MIDI note on command
* TRIGGER B(if TRIGGER B is set to control the SYNC POP)
* SYNC POP SWITCH on the front panel. (fig. 1-15)
(When ProCue 1m1 receives a signal to produce a SYNC POP the SYNC POP will
first be generated when the next video frame shift occurs. The SYNC POP command
therefore has to be sent in the video frame before the desired frame shift.
This is done to insure that the sync pop will start and end on a frame shift.
CLICK I WIDTH control (fig. 1-9)
Adjusts the width of the chosen click. When you turn the knob clockwise the width
will decrease and the click will get higher/more bright.
|