Note: For setting up CLICK 1, CLICK 2, SYNC POP and VIDEO a MIDI connection

has to be established between ProCue 1m1 and the device that controls ProCue 1m1
or a MIDI Keyboard.

MIDI NOTES and MIDI CHANNELS

For CLICK 1, CLICK 2, SYNC POP and VIDEO the MIDI note/channel setup
procedure is as follows:

Go to setup mode by pressing "SETUP" button.
Because CLICK 1 is the first function the "Pointer" has made the CLICK 1 LED

(fig. 1-23) blink. If changes regarding CLICK 2, SYNC POP or VIDEO is wanted

just press the "NEXT" button until the LED belonging to the desired function is
blinking slowly. When the LED for one of these functions is blinking the given

function is ready to be set. Through MIDI generated by MIDI software or a MIDI

keyboard ProCue 1m1 can now receive and learn a MIDI note number and MIDI
channel number that will be assigned for the given function. When a MIDI note

number/channel, different from those already stored for the given function, have been
received by ProCue 1m1 the function LED will blink with a "double blink" pattern.

When the desired MIDI note / channel has been sent to ProCue 1m1 press the "SET"

button to store the settings. The LED belonging to that function will then blink
rapidly. If no changes are needed just press the NEXT or SETUP button.

Note: For the VIDEO function only the MIDI channel can be set. The MIDI notes for

all visual events can be seen in the key layout fig. 3 page 20

Default settings:

When the clicks or sync pop share MIDI channel with the Visual Events, two default

MIDI notes will be assigned each of these functions. The setting monitor only shows

the lowest one of these two midi notes.

CLICK 1: MIDI note number 36 and 37 on MIDI channel 16.

CLICK 2: MIDI note number 38 and 39 on MIDI channel 16
SYNC POP: MIDI note number 41 and 42 on MIDI channel 16

VIDEO (Visual events): Note numbers see fig. 3. Default MIDI channel is 16

When the clicks and sync pop do not share MIDI channel with the Visual Events only

one MIDI note can be assigned to each of the functions. If you move only the Visual
Events MIDI channel the default Click 1's MIDI note number is set to 37, Click 2's

MIDI note number is set to 39 and the SYNC POP MIDI note number is set to 42.

14